BDSYP - CHEM-PLEX 1381

  • MSDS: BDSYP
  • Manufacturer: NON FLUID OIL CORP
  • Product Name: CHEM-PLEX 1381
  • National Stock Number: 6850-00-281-4033
Product Identification

Product ID:CHEM-PLEX 1381
MSDS Date:01/01/1987
FSC:6850
NIIN:00-281-4033
MSDS Number: BDSYP

Responsible Party
NON FLUID OIL CORPORATION

Emergency Phone: (201)344-3451

Cage: LO133

Contractor
NONFLUID OIL CORP/NFO TECHNOLOGIES, INC
NEWARK, NJ 07105-3009 US

Telephone: 201-344-3451/800-424-9300(CHEMTREC)

Cage: 76736

Ingredients

DIMETHYL POLY SILOXANE (TLV AS OIL MIST)

Fraction By Weight: U/K

ACGIH TLV: 5MG/CUM


ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: U/K

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293

Hazards

Effects of Overexposure:MAY CAUSE TEMPORARY DISCOMFORT TO EYES;OR SKIN
ON PROLONGED CONTACT.

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Fire Fighting

Flash Point:500F/260 (C OC)
Lower Limits:U/K
Upper Limits:U/K
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL
Fire Fighting Procedures:USE NIOSH APPROVED SCBA IN FIRES AND CONFINED
AREA
Unusual Fire/Explosion Hazard:NONE SPECIFIED.USE REASONABLE CARE.

Accidental Release

Spill Release Procedures:USE PROPER PERSONAL PROTECTION.USE ABSORBENT
MATERIAL AND RECOVER FOR PROPER DISPOSAL.

Handling

Handling and Storage Precautions:STORE IN COOL DRY AND VENTILATED
AREA.KEEP AWAY FROM HEAT AND OPEN FLAMES.KEEP CONTAINER TIGHTLY
CLOSED
Other Precautions:AVOID SKIN AND EYE CONTACT.DO NOT USE CONTAMINATED
CLOTHES.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR FOR OIL MIST IF
CREATED.
Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN Protective Gloves:TYPE AS REQD
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED TO PREVENT PROLONGED CONTACT.
Supplemental Safety and Health
MSDS UNDATED

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>300F/149C
Vapor Pres:<5
Vapor Density:U/K
Spec Gravity:U/K
Evaporation Rate & Reference:U/K
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SILICONE GREASE
Percent Volatiles by Volume:<5.0

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN TO MFR
Stability Condition to Avoid:NONE SPECIFIED
Hazardous Decomposition Products:ZNO,SIO*2,CO*2,TRACES OF UNBURNT
CARBON.

Disposal

Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.